Sunday, May 22, 2011

An Italian Renaissance 1440s man's outfit.

Blog note: Sadly I chose a too early period so couldn't enter the inaugural challenge. 

I did, however, make most of the 1440s man's outfit, but have yet to blog about it, I will, when I get more time :) 

In the interim I have entered the 2012 challenge, and been accepted, and you can follow my progress here.

I was a late entrant to The Italian Renaissance Costuming Challenge, I took the place of a withdrawn entry. Sadly, as I did not read the rules correctly (a very bad habit I have!) and I had to withdraw from the challenge.

I chose a period that was too early sadly :) 

However, all is not lost, I still intend to make this and to send it to The Realm of Venus for the Italian Showcase once it is complete.  My challenge to myself is to complete this by the end of August.

I will update as I go. (Ed note: oops, fail!)

To celebrate the 10th anniversary Bella has issued a challenge to create a complete outfit in four months from the skin out. Details are on here : The Italian Renaissance Costuming Challenge. The competition started on the 21st April and its now the 22nd of May, so I am going to have to move my sewing stumps!  The competition ends on the August 21,  2011

Bio: I've been sewing since I was five, I was taught to sew by my mum who taught me the way she was taught, so consequently I have a repertoire of vintage and historical sewing techniques in my tool box. I've been costuming for the last 10 years, I am a member of the SCA, Dismal Fogs, though not very active, and I play in later time periods as well, mostly Regency, SteamPunk and 1940s. 


"Pope Celestine III (c.1106-98) Grants Autonomy to the Hospital of Siena"
Project: My partner needs an outfit to fit her male personna for the Italian Renaissance. I am working on recreating, the elegant young man in blue above. He is taken from Domenico di Bartolo's "Pope Celestine III (c.1106-98) Grants Autonomy to the Hospital of Siena".

I will be making a camica, mutande, farsetto, calze, giornea, and, hopefully, a mantello, but that might be pushing my luck!

Friday, May 20, 2011

The learning curve in creating a history dress range

I'm working on the development of an historical dress pattern range, starting in the 1940s. I've never had anything to do with the rag trade industry, I'm a home dressmaker and teacher, so everything is new and interesting.

I thought others would be interested in the process, so here are the steps.

1. Find a good pattern maker
The first step is to find a pattern maker. I'd already drafted my patten from a Miss Page dress. I searched the interwebs and researched and found one to test the waters with. We met, discussed the project and the process.

The pattern maker creates the first pattern from your design (a pattern is a bonus for them). You get an industry size 10 pattern to test. I made this up as a toile, fitted my model, sent the modifications off. Then the changes are incorporated, a new pattern sent and then this cycle continues until you are satisfied that it's exactly the way you want it to be.

The first change is included, each one after that costs extra.

Once the size 10 model is ready, the pattern maker then creates all the sizes in your range, in my case 8 - 20. Then I test all of these, which means making up the dress over and over again in each size and fitting onto size appropriate models, noting changes and required adjustments. If you can do this yourself it is much more cost affective.

Once all is agreed to, then your pattern is turned into a commercial nested pattern with all the appropriate markings for the home dressmaker.

2. Create your pattern notes
As I made up each model I created my pattern notes. These then get passed to others to use and test and ensure that they make sense. Bad pattern notes can ruin a good pattern.

3. Test, test, test!
When all is tested, rewritten as required, tweaked and smoothed to perfection, then your ready to think about pattern production.

That's where I am now!


- Posted using BlogPress from my iPhone

Sunday, May 8, 2011

Making a Regency long sleeved Pelisse


I made myself a long sleeved Regency Pelisse or Redingote (coat) last week to keep me warm and cozy at IronFest in Lithgow where the Battle of Lithgow was fought valiantly by Bonaparte's troops and our brave 95th (Rifle) Regiment of Foot, 2nd Battalion (Australia)

The 2011 IronFest theme was SteamPunk and Regency is much earlier I know, but as my partner and I both missed out on the Jane Austen Festival Australia the week before Easter as our sweet dog Astro was lost by his carer, well, we are going to be time travellers and wear our Regency garb!

1807 Redingote
I based my Redingote on the image to the right,  an 1807 Redingote--walking dress with silk and mohair ottoman Kashmir wool shawl from the Kent State University Museum. I love the rich colour of this coat, it is glorious, I wish I had such beautiful fabric in my stash. I love the bands at the bottom and the belt detail.

Mystery purple and green trim
I used a deep purple 'mystery' fabric that I bought a few years back in a second hand shop, it feels like wool, but doesn't pass the burn test, still an all, I have enough of it and that's the deciding factor. The green velvet trim is left over from a Burgundian I made a few years back, its lush upholstery cotton velvet. The lining is a greeny gold
Lining

I used the Sense and Sensibility Pelisse pattern as the basis for my Redingote and tweaked it to match these images, mostly.

This blog post is dedicated to @SuzieWong66 who suggested I discuss my process.

It took me two full work days and a couple of nights to complete the redingote, well to a wearable stage, when I wore it on Saturday it was sans buttons, back belt, wrist tabs and two ribbon bands!

Stage 1 - The bodice lining:
The lovely 1807 Redingote has a cross breasted bodice, similar to the dress styles of the same period, I did intend to do this, but a 'more haste less speed' error had me cutting out the collared pattern and not adapting it, which is a shame, because this one is so different, but my next one will use this detail.

I like Sense and Sensibility patterns, they are well researched and they fit me well, I know if I cut it out I won't need to do any adjustments and I no longer need to make a toile. So when I put together my bodice lining and the armholes were too tight, I couldn't understand it, I trimmed them down and continued on my merry way, only to discover that I had put the back bodice together upside down! As I said earlier "more haste less speed"

Back bodice lining - incorrect
Stitching the darts.
I didn't realise however until I had the sleeves on, a huge do'h moment! As it was the lining, it caused few issues, and its a good lesson in paying attention, even experienced tailors make silly errors and thankfully this one didn't cause any problems. Having made the mistake with the lining bodice, I ensured the fashion fabric was put together correctly. The bodice went together well as you can see from the photos.


The sleeves fitted like a dream once I had the back panel correct, nothing like a bit of frog stitching in a 'quick quick' project to make you concentrate!

Stage 2: The skirts:
Adding the skirts is the easiest part of all, they are just gathered rectangles of fabric. I used the back skirt pattern from Sense and Sensibilities Elegant Ladies Closet as it gives a lovely back drape and a small train, which is indeed very elegant. 

I added the bottom velvet band trim first, its easier to handle so much fabric without a bodice attached. I wanted three, but needed to fiddle with the green velvet and so ended up with one. I usually hand stitch all outside pieces but I didn't have time. Thankfully the cotton velvet is very thick and the machine stitches were lost in the pile.

I then stitched the lining to the skirt fronts.

The only difficult part of the skirt is ensuring that both the lining and fashion fabric are evenly gathered and then attaching all that gathered fabric to the bodice. When I have so much fabric to gather I do it in smaller sections, in this instance in quarters and I gathered the lining and fashion fabrics separately.

Also, I always hand tack difficult pieces together, this ensures that everything is in the right place before machine stitching and less chance of a broken needle in a thick and difficult bit of seam as well, both my fabrics were quite thick, especially the mystery purple.

Hand stitching bodice to skirt
Once the skirts were attached I could then hide the seams and gathering with the bodice lining and so the redingote looks good both inside and out.

Stage three: Hand sewing
To get my redingote ready for the weekend, I needed to hem the skirts and the sleeves and this was easily done listening to a fabulous Renaissance concert on ABC Classic FM.
Stitching lining to sleeve









Stage 4: Wearing it at IronFest 
95th (Rifle) Regiment of Foot, 2nd Battalion (Australia)
I was so glad I made my redingote, a wool shawl would not have cut the freezing weather at Lithgow! I didn't have time to do the buttonholes, so I used a broach to keep it closed.

The day was fabulous, IronFest is always a blast, but even better when you get into the excitement of it all and join the re-enactors.